對于很多冷庫地面都會使用花紋鋁板材，它是1060鋁板為板基加工而成的鋁合金花紋板材，能夠適應平常的環境。針對鋁板和鋼板很多人不知道哪種比較硬使用時間長，花紋鋁板和花紋鋼板的差別是什么？鋁板生產廠家為你講解。
For many cold storage floors, patterned aluminum plates are used. They are aluminum alloy patterned plates processed from 1060 aluminum plates, which can adapt to the normal environment. For aluminum plate and steel plate, many people do not know which is hard and has a long service life. What is the difference between patterned aluminum plate and patterned steel plate? The aluminum plate manufacturer will explain to you.
1、花紋鋁板的表面易自然生產一層致密牢固的AL2O3保護膜，能很好的保護基體不受腐蝕。通過人工陽極氧化和著色，可獲得良好鑄造性能的鑄造鋁合金或加工塑性好的變形鋁合金.花紋鋼板就不存在保護膜。
1. The surface of patterned aluminum plate is easy to produce a layer of dense and firm AL2O3 protective film, which can well protect the substrate from corrosion. Through artificial anodizing and coloring, a cast aluminum alloy with good casting performance or a deformed aluminum alloy with good processing plasticity can be obtained. The checkered steel plate does not have a protective film.
2、鋼板的密度是7.93，鋁板的密度是2.7，二者的密度不同，同等面積下重量不同。鋼板硬度會高一點，價格比較便宜，要看用在什么方面。如果用在有海水和一些有化學品環境，鋁板會起到、耐腐蝕，防銹、易切削。
2. The density of steel plate is 7.93, and the density of aluminum plate is 2.7. They have different densities and different weights under the same area. The hardness of the steel plate will be higher, and the price is cheaper, depending on what it is used in. If it is used in the environment with seawater and some chemicals, the aluminum plate will play a role in corrosion resistance, rust prevention and easy cutting.

3、鋁板的密度低，同樣體積使用的材料少，但是合金鋁板的硬度可以與鋼板媲美，防銹防腐效果好。
3. The density of aluminum plate is low, and the materials used for the same volume are few. However, the hardness of alloy aluminum plate is comparable to that of steel plate, and the effect of rust prevention and corrosion prevention is good.
4、鋼板的強度大約是鋁板強度的七倍左右。這樣算下來，1.0mm的鋼板大約與7.0mm的鋁板的強度相當。
4. The strength of steel plate is about seven times that of aluminum plate. In this way, the strength of 1.0mm steel plate is equivalent to that of 7.0mm aluminum plate.
5、鋁及鋁合金的密度接近2.7g／，約為鐵或銅的1／3，鋁及鋁合金的強度高。經過一定程度的冷加工可強化基體強度，部分牌號的鋁合金還可以通過熱處理進行強化處理；導電導熱性好。
5. The density of aluminum and aluminum alloy is close to 2.7 g/, about 1/3 of that of iron or copper. The strength of aluminum and aluminum alloy is high. After a certain degree of cold working, the matrix strength can be strengthened, and some brands of aluminum alloys can also be strengthened by heat treatment; Good conductivity and thermal conductivity.
以上所講解內容便是花紋鋁板和花紋鋼板的五點差別了，對此您有什么想法或者問題或者需求呢？歡迎來我們網站http://jxhupan.com進行咨詢！
The above contents are the five differences between patterned aluminum plate and patterned steel plate. What are your thoughts, problems or needs? Welcome to our website http://jxhupan.com Consult!